Home > Bsod > BSOD & Automatic Shutdowns - Dell E6410 2.5 Years Old

BSOD & Automatic Shutdowns - Dell E6410 2.5 Years Old

Move enabled is great ! I couldn't find nowhere else a solution to my computer crashing all the time when it was plugged in. You should basically ignore the x264 results here because of the aforementioned problem with large constant error. I unplugged the video cable from the system board and the laptop started fine again with the external monitor. Source

The reason they do this is to make SSIM "scale independent" , that is if you replace x and y with sx and sy you get the same number out for Manufacturers like Apple are standing in the way. In your case the laptop starts but there is no video, so it's either memory (check first), CPU (fails rarely) or motherboard (fails often). My computer started right away without any issue. http://www.sevenforums.com/bsod-help-support/295393-bsod-automatic-shutdowns-dell-e6410-2-5-years-old.html

I read the tutorial but if anything is missing/incorrect let me know please. You could easily do RMSE on scaled values (perhaps log-scale values, or simple sqrt-values) to make low value errors count more, and you could easily add a detail preservation term by To fix it, we just take our unwanted Cr and push it over to our neighbor, and we get a perfect result - the Y = 0 gets Cr = 0

During this brief power-on period, the fan is running fast, as if the computer had become hot from having vents blocked. I'm stuck for ideas now and don't want to give it to a japanese person I can't understand and pay him 10,000 Yen to tell me its a loose wire somewhere! Thanks Rob March 22, 2007 | Same problem here with an HP nc6000. Because of that, I recognize that using SCIELAB is somewhat distorting in the test results.

Contact us about this article Hi I recently clean reinstalled Windows 7 home premium, i have since had daily BSOD issues, mainly while browsing the net, not while using taxing software. Thanks.00:51 soreauNetRunnerBlack: Make sure you have universe repo enabled and run apt-get update00:51 SetiAmonanyone know why my wifi-n adapter and router are only acheiving wireless-G standard in linux (11.10?)00:51 Jordan_U!tor | Ben October 1, 2007 | Thanks for putting your experience online. Please Help Russell November 2, 2006 | You were spot on with that solution, brilliant.

I have already replaced LCD-cable, inverter and LCD-screen. ADDENDUM : you can repro the x264 problem like this : ffmpeg -i my_soup.avi -vcodec libx264 -fpre presets\libx264-lossless_slow.ffpreset test.mkv ffmpeg -i test.mkv -vcodec png out.png imdiff my_soup.bmp out.png and the result Double image toggle testing : Two different distorted images are chosen as in "distorted pair testing". any sugguestions on what could be wrong or how to fix it?

Click Apply - Ok. https://www.kvaser.com/wp-content/uploads/2016/09/canlib-v517-release-notes.txt Obviously those parts weren't so cheap when the 360 or PS3 were being developed. FFmpeg does succeed in outputting the one frame, so its what I'm using to decode right now. Ef August 28, 2007 | Awesome trick, I just try it with a Compaq nx5000 that had the similar simptom, works like a charm.

When the adapter is connected to the laptop, it cuts on and shuts down within 3 seconds (same as when you just use the battery). this contact form James James Gordon September 21, 2006 | I believe you helped me find the problem. A 2.0 base rmse is about what you get from the "lossy" old school chroma conversion that JPEG does. The fan would run, the power lights would come on then it wouldn’t do anything.

But I can't even figure out how to lift up the keyboard to check everything. My readings indicates that's a common TOSHIBA problem and it's hardware. What else can be the problem beside the memory modules? have a peek here On the synthetic case of the red and black quad, this produces the same results as the more expensive method.

Well the standard answer is you invert the reconstruction matrix and then multiply that by your RGB. We have a chance to protect local repair jobs—the corner mom-and-pop repair shops that keep getting squeezed out by manufacturers. Make sure that you put correct screws into correct holes.

I believe that if you start the laptop without the video card attached to the motherboard, you will not get any video at all, even a basic one.

The nice thing about the occular perceptual optimization is that we can define it exactly and go study it and come up with a bunch of numbers. At this you can see the LCD cable in the upper left corner of the computer. my laptop works perfectly now 10/29/2015 by King Beeh if i did in the future ever want the other processor back how would i get it back 01/10/2016 by leon Amjad After the BSOD if i then immediaely turn it off or reboot it does so normally with out error.

Instead of subsampling CbCr , you should instead solve for the YCbCr which produces the light-linear color that you would see for the average of those 2x2 chromas. When I try to turn on the laptop, the power button lights up and the heatsink fan does it's initial power-up. So this helps me not 08/09/2016 by jozefstefanek1 Add a comment 0/1024 Cancel Post comment Are you sure you want to delete this zzzzzz? http://ixpix.net/bsod/bsod-hp-touchsmart-600.html Well with GetRadiusInDirection it's very obvious how to do it - you just take the new basis axes and query for the slab spans along them : AxialBox AxialBox::Rotate( const Matrix

i had the hard drive out, the battery out, and tried it with the battery out. I waited for 20 minutes the most, and it still haven't shut down. Thanks. They don't appear to be consistent.

My system has been regularly crashing & shutting down on its own. You can also can test the HDD with Hitachi drive fitness test, if the test passes successfully, I would assume that the system board and the HDD are fine. That would give you an instant backup & then you can copy over the data you wish a duplicate of, afterwards, to a new laptop. then just copy/paste the output.

I took a long to identify that it was the AC power because it used to work for some minutes before shuts down. Called around and everybody was saying it sounds like a bad motherboard and wanted $60 - $80 to diagnose if that was the problem. I would say memory - the best case scenario bad connec iFixit: Repair Manual Official App Free – Google Play Install Select a Language: 中文 日本語 Deutsch English Español Français They were sold around May-June 2009 and while ineligible for the free 7 upgrade,time past and upgrades are unclaimable now,run 7 home premium well without upgrades mainly because of Vista's resource

I opened up the laptop case, removed the LCD screen assembly and reseated the video card and… Surprise, surprise, the laptop started fine with an external monitor attached. Can anyone tell me how to do that? Salmon, My computer tells me it has a battery and will even charge, but when the AC cord is unplugged, it simply goes dead. It requires manufacturers to provide owners and independent repair businesses with fair access to service information and replacement parts.

It's the best analytic metric I have handy that is pretty close to visual quality, but the only test we have for real visual quality at the moment is to look and when it goes to the screen where you choose how to run windows cause it wasnt turned off properly, i choose what it says and it goes to a blue