Home > Hard Drive > Windows Not Recognizing 2TB SATA Drive

Windows Not Recognizing 2TB SATA Drive

Contents

Choose the NTFS File System option. paulearsDec 10, 2009, 10:59 PM Just wanted to say thanks to paperdoc - his solution was spot on the mark and really helped me - many thanks AnonymousDec 31, 2009, 6:31 And, Then repeat, only reconnect the hard drive and listen for it to spin up. Switch power cables with a device like a CDROM or DVDROM drive so that you are using a known-good Do reply with results. Check This Out

See more How to fix hard drive not detected How to repair hard disk not detected Hard disk not detected in bios 2nd SATA HDD not detected Sata Hdd not detected SYS BIOS SawDrive but Windows7 would not. How do you develop software without acceptance criteria? All Rights Reserved. http://superuser.com/questions/991681/new-seagate-2tb-hard-drive-not-recognized-in-windows-10

Hard Drive Shows Up In Bios But Not Disk Management

One error in particular, however, is more important than others to watch out for. Also, refer to the Service Manual for accurate steps and safety instructions. * In case of expired warranty scenario, I would be able to provide limited support, which will not cover Run Data Lifeguard Diagnostics Data Lifeguard Diagnostics can help you diagnose and solve most common problems. I expect OP (damaster) and joses both have got this far.

The right hand part will subdivide into two windows. Your new disk should be here with no letter name and no info. The lower one, which SCROLLS, also shows you other devices Windows does not yet understand. Bios Not Detecting Hard Drive It appeared suddenly, without warning: Each Seagate hard drive engages in regular self-tests, and most computers automatically run regular SMART tests on the hard drive(s) installed on them.

Helpful +1 Report Miggin 1Posts Saturday November 9, 2013Registration date November 9, 2013 Last seen Nov 9, 2013 at 03:07 AM Not sure if this is relevant to your motherboard on Note: The steps above require you to reseat the components by removing the system cover/taking apart the chassis. The upper one shows you only the devices Windows already knows how to use. STHellRaiserOct 26, 2009, 12:43 AM if u have a problem with a drive requiring formatting, format it in xp deos any still have this problem?

your info was right on..... Internal Hard Disk Not Detected RIGHT-click on it and, from the menu, choose to Partition the drive. Before taking the PC to my local computer guy I thought I'd try one last thing. You will need to enter the the BIOS setup in order to verify their current state.   When you add a second drive to the system, it may be need to be

Second Hard Drive Not Showing Up In Disk Management

We will await your response. Try a different EIDE or SATA cable If a bad data cable is installed, the symptoms could be ranging from corrupt data, wrong info in BIOS, to not recognizing the drive. Hard Drive Shows Up In Bios But Not Disk Management This usually means that the user wants to copy all the data from the older hard drive to the newer drive, then install the newer drive as the bootable drive. Windows 10 Not Detecting Second Hard Drive So let's re-examine.1.

PaperdocFeb 2, 2010, 1:37 AM Deca, let's see if we can help. his comment is here m 0 l Kirk Robinson March 28, 2015 10:43:44 AM I was up all night working on this and here's what found. You make that disk and then boot from it into a mini-DOS that works entirely independent of Windows or any other OS on any hard drive. Since the repair has failed, simply choose to reinstall Windows.  If that fails to reinstall Windows, a stronger erase is probably required. Install/diagnostic/repair Software From Seagate

schristieJan 23, 2010, 1:42 AM Paperdoc said: The problem may be you're not looking in just the right spot . The lower one also shows you the hardware Windows can see, including some devices Windows does not yet understand. Reseat (disconnect and reconnect) the Hard Drive connections (both SATA and power connectors) and check if the computer boots. this contact form A Quick Format will do the job in 5 to 15 minutes.

I recently picked up a new 2TB Seagate laptop SATA HDD for my Asus G73Jh laptopp running windows 8.1. Hard Drive Detected In Bios But Not During Windows 7 Installation I expect OP (damaster) and joses both have got this far. Once this worked for me, I tried with different drives and it worked all times, good luck> duanewMar 17, 2010, 9:50 PM I was having a similar problem as others noted

Register now Not a member yet?

Is it FAT32 or NTFS? It involves using Windows XP to format the drive! NTFS is out of the question saying the is a 'directory structure problem' please use CHKDSK. How To Repair Hard Disk Not Detected This set of troubleshooting steps will attempt to get the drive detected again, or to conclude whether the drive has failed and should be replaced.

RIGHT-click on it and, from the menu, choose to Partition the drive. Various attributes are being monitored and measured against certain threshold limits. Happened after my computer froze and now the system now takes a longer than usual pause between windows load screen and the welcome screen. navigate here Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build.

My father moved some files onto it before... How can I get my computer to recognize both drives in AHCI mode? You need to use Windows Disk Management to do two jobs: Partition and Format that new unit. You'll have a choice of how big it should be and most likely want to use all the drive in one volume. (You can use only part of the space.

So I thought it may have been a fluke so I order another WD 500 and put it in today and it work right away. When all the choices are made, go ahead with the Partition operation.When that is done, come back to this new Partition and RIGHT-click again and choose to Format it. When installed in the secondary HDD bay, disk manager does NOT recognize the disk, however if I use a USB adapter the disk pops right up. Please contact Seagate Recovery Services for assistance in recovering your data.You should replace the drive.

HDD The Guardian Series: Highly Specialized Internal Drives Rescue We Can Recover Your Files, Just in Case. Choose the NTFS File System option. If a "SMART error" has recently appeared on your computer, this generally means drive failure is imminent or has already occurred. Until this driver is installed, Windows cannot access the RAID array.